Intel PCM-9387 Manuel D’Utilisation

The PCM-9387 is equipped with a high performance 32-bit Ethernet 
chipset which is fully compliant with IEEE 802.3 100 Mbps CSMA/CD 
standards. It is supported by major network operating systems. It is also 
both 1000Base-T and 100Base-T compatible. The network boot feature 
can be utilized by incorporating the boot ROM image files for the appro-
priate network operating system. The boot ROM BIOS files are combined 
with system BIOS, which can be enabled/disabled in the BIOS setup. 

Before installing the Ethernet driver, note the procedures below. You 
must know which operating system you are using in your PCM-9387 
Series, and then refer to the corresponding installation flow chart. Then 
just follow the steps described in the flow chart. You will quickly and 
successfully complete the installation, even if you are not familiar with 
instructions for MS-DOS or Windows.

1.

a. Select "Start", "Settings". "Control Panel".

Note: