Avery 6057 Manuel D’Utilisation
T e s t i n g t h e S p e a k e r
1.
Touch the Emerald key to access the Start Menu, select Settings, Control Panel, and
Speaker Test
Speaker Test
.
2.
Touch Run Test. While the test is performed, you hear a tone sounded at each frequency
(200 Hz – 6400 Hz). The frequencies are displayed for each tone as they are played.
(200 Hz – 6400 Hz). The frequencies are displayed for each tone as they are played.
3.
Touch OK to return to the Control Panel.
V i e w i n g t h e S y s t e m P r o p e r t i e s
Use the System window to change the device’s name
and/or description and to view Operating System
information, etc.
and/or description and to view Operating System
information, etc.
Review how to enter data using the input panel before
continuing. See “
continuing. See “
”
for more information.
1.
Touch the Emerald key to access the Start Menu,
select Settings, Control Panel, and System.
select Settings, Control Panel, and System.
Three tabs appear: General, Device Name, and
Copyrights.
2.
Touch the Device Name tab to change the device’s
name.
name.
3.
Touch the Device name box. Touch the diamond
key to display the input panel if it does not
automatically appear. Enter the Device name. Use
Bsp
key to display the input panel if it does not
automatically appear. Enter the Device name. Use
Bsp
on the input panel to clear any previously
entered information.
2-12
System Administrator’s Guide
4.
Touch the Device description box.
5.
Enter the Device description. Use Bsp on the input panel to clear
any previously entered information. Touch the diamond key to
hide the input panel.
any previously entered information. Touch the diamond key to
hide the input panel.
6.
Touch OK when finished.