IBM RT-686EX Manuel D’Utilisation
Components and Functions
15
Please note FDD cable is different from printer adapter cable.
Hard Disk Drive
The Hard Disk Drive (HDD) is a 2.5” type standard IDE interface data storage
device.
device.
HDD and FDD, CD-ROM drives are removable. This provides convenience and
security. They can ONLY be removed while the power is OFF.
security. They can ONLY be removed while the power is OFF.
Note: NEVER drop your HDD, FDD, CD-ROM module or expose them to high
temperature, high humidity, or any hazardous environment. NEVER try to
disassemble the module.
Static discharge may destroy your device and data. Always pick up the
modules by touching the case only.
disassemble the module.
Static discharge may destroy your device and data. Always pick up the
modules by touching the case only.
CD-ROM Drive
The CD-ROM drive is a standard IDE ATAPI type, which accepts a variety of
standard 12cm CDs such as CD-ROM, audio CD, CD-I, Photo CD, video CD,
etc.
standard 12cm CDs such as CD-ROM, audio CD, CD-I, Photo CD, video CD,
etc.
The following procedure assumes that all the necessary CD-ROM utilities were
installed on the computer. For CD-ROM utility installation, please refer
“Utilities and Drivers”.
installed on the computer. For CD-ROM utility installation, please refer
“Utilities and Drivers”.
Put CD into CD-ROM drive
While the power is ON, push the CD-ROM drive's eject button. The tray will
release. Then gently pull the tray out. Put the CD on the holder and push the tray
back into the cabinet. Any dirt on the data side of the CD may cause read error.
Please do not touch this side when handling CDs.
release. Then gently pull the tray out. Put the CD on the holder and push the tray
back into the cabinet. Any dirt on the data side of the CD may cause read error.
Please do not touch this side when handling CDs.