RTS DKP 16 CLD Manuel D’Utilisation

To answer a CWW call, do the following:

Press down and hold the CWW key to talk back.

To clear a name from the CWW window, do the following:

When the CWW window is populated, tap up on the CWW key. 

NOTE: If a second call is received in the CWW while a caller name is already displayed, the Call Waiting window 

flashes. 

To answer a second call, do the following:

Tap up to clear the first name, and then hold the key down to talk to the second caller.

NOTE: By default, only the names of callers who are not currently assigned to intercom keys appear in the call 

waiting window. Alternately, you can force all caller names to display in the call waiting window. this is 
controlled by DIP Switch 2 on the ADAM Master Controller card or the Always stack callers in the call 
waiting window option found in AZedit (Options|Intercom Configuration|Options). Setting this option in 
AZedit overrides the DIP Switch 2 setting on the Master Controller.

Depending on the source selected, shown in the display window, when the Mic Mute switch is pressed UP, the corresponding 

feature is muted (shown with a mute icon 

 overlaid on the feature icon). For CWW key location, see “Reference View - 

KP 32 CLD (90007858000)” on page 6.

Figure 21 is a representation of what the mute icon looks like in the display. All muted icons cannot be seen as 

shown in Figure 20. See Table 5 on page 35 for information on when the various display icons appear relative to 
the configuration options specified.

A flashing mute icon appears on any active mics when the mic mute key is pressed. If tone is enabled, which 

disables mics, the mute icon appears on any active mic, but does not flash.

All Muted Display Icons