Little Wonder G-4100 Manuel D’Utilisation
ZyAIR G-4100
8
6. Click
Advanced. Remove any previously installed
gateways in the IP Settings tab and click OK to go back
to the Internet Protocol TCP/IP Properties screen.
to the Internet Protocol TCP/IP Properties screen.
7. Click
OK to close the Internet Protocol (TCP/IP)
Properties window.
8. Click
Close (OK in Windows 2000/NT) to close the
Local Area Connection Properties window.
9. Close
the
Network Connections window (Network
and Dial-up Connections in Windows 2000/NT).
2.2 Checking/Updating Your Computer’s IP Address
1.
In the computer, click Start, (All) Programs, Accessories and then Command Prompt.
2. In
the
Command Prompt window, type "ipconfig" and then press ENTER to verify that your computer’s IP
address is in the correct range (192.168.1.2 to 192.168.1.255) with subnet mask 255.255.255.0. This is
necessary in order to communicate with the ZyAIR.
necessary in order to communicate with the ZyAIR.
Refer to your User’s Guide for detailed IP address configuration for other Windows and Macintosh
computer operating systems.
computer operating systems.
2.3 Testing the Connection to the ZyAIR
1. Click
Start, (All) Programs, Accessories and then Command Prompt.
2. In
the
Command Prompt window, type "ping” followed by a space and the IP address of the ZyAIR
(192.168.1.1 is the default).