Enterasys Networks 1G58x-09 Manuel D’Utilisation
Logging and Network Management Command Set
Configuring Simple Network Time Protocol (SNTP)
11-63
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set the SNTP poll interval to 30 seconds
:
11.2.4.5 set sntp server
Use this command to add a server from which the SNTP client will retrieve the current time when
operating in unicast mode. Up to 10 servers can be set as SNTP servers.
operating in unicast mode. Up to 10 servers can be set as SNTP servers.
set sntp server {ip-address | hostname}
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
interval
Specifies the poll interval in seconds. Valid values are 16 to
16284.
16284.
Matrix>set sntp poll-interval 30
ip-address |
hostname
hostname
Specifies the SNTP server’s IP address or host name.