Enterasys Networks 1G58x-09 Manuel D’Utilisation
Logging and Network Management Command Set
Configuring Convergence End Points (CEP) Phone Detection
11-83
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to set port 65 as the minimum port to be used for convergence end points
detection for CEP group 1
detection for CEP group 1
:
11.2.6.10set cep initialize
Use this command to re-initialize convergence end points detection on one or more CEP-enabled
ports.
ports.
set cep initialize port-string
detection-id
Specifies a CEP discovery group ID. This group must be
created and enabled using the set cep detection command
as described in
created and enabled using the set cep detection command
as described in
. Valid values are 1 -
2147483647.
porthigh |
portlow port
portlow port
Specifies a maximum or minimum UDP or TCP port to be
used for convergence end points detection.Valid values are
1 - 65535.
used for convergence end points detection.Valid values are
1 - 65535.
Matrix>set cep detection portlow 65