Enterasys Networks 1G58x-09 Manuel D’Utilisation
Security Configuration Command Set
Configuring MAC Locking
14-59
14.3.4.15set maclock autostatic passthroughmac
Use this command to enable a received multicast destination MAC address to be scoped to VLAN
egress lists other than that of the VLAN of which it is a member.
egress lists other than that of the VLAN of which it is a member.
set autostatic passthroughmac mac-address
Syntax Description
Command Defaults
None.
Command Type
Switch command.
Command Mode
Read-Write.
Example
This example shows how to assign MAC address 01:00:5e:00:00:05 as the autostatic MAC pass
through address:
through address:
NOTE: For this command to work properly, both the public ingress and egress VLANs
must be configured for autostatic MAC locking and described in
must be configured for autostatic MAC locking and described in
, and
the pass through MAC address must be a multicast address. Improper use of this
command may result in connectivity issues.
command may result in connectivity issues.
mac-address
Specifies a MAC address.
Matrix>set maclock autostatic psssthrough mac 01:00:5e:00:00:05