Hypercom ICE 5000 Manuel D’Utilisation
Chapter 2
2-4
ICE 5000 and 5500 Hardware and Installation Operators Manual
940184-003, rev. B
Self-Test and Diagnostics
Following a successful key injection, a double beep indicates that the terminal has automatically
initiated its self-diagnostic routine.
initiated its self-diagnostic routine.
The software and download status of the terminal is displayed during the self-test, which lasts
approximately four seconds. During this time, if the terminal is loaded with the security key, the displays
shown in the following table are typical.
approximately four seconds. During this time, if the terminal is loaded with the security key, the displays
shown in the following table are typical.
A memory page may be in one of the states shown in the following table.
Table 2-1. Self-test and diagnostics with software loaded
Description
Terminal response
Software: Software name and version.
DLL: Tracks the number of downloads. This is
controlled by Term-Master.
controlled by Term-Master.
OS: Operating System and version.
Terminal: Terminal ID number.
IDENTIFICATION
SOFTWARE
XX_XXXXXX
DLL
00
OS
T5KBOOTXXX
TERMINAL
NNNNNNNN
WAIT SELF TEST
Installed memory is displayed. The display
indicates one megabyte of memory installed.
indicates one megabyte of memory installed.
MEMORY PAGE STATUS:
BOOT: XXXX
01: AAAAAAAAAFFFFFF
17: FFFFFFFFFFFFFF
Table 2-2. Memory page states
Status
Description
A
Active: application resident
C
Corrupt: checksum error
F
Free
L
Lost Communication
I
Inactive
U
Unknown
-
No fit: not available for use