TP-LINK TL-WR740N Manuel D’Utilisation

 

-5- 

)

After a device is successfully added to the network by QSS function, the QSS LED will keep on for 
about 5 minutes and then turn off.

 

 

Figure 1-2    Rear Panel sketch 

The following parts are located on the rear panel (View from left to right). 

¾

  RESET: 

There are two ways to reset to the Router's factory defaults: 

1) Use 

the 

Factory Defaults function on System Tools -> Factory Defaults page in the 

Router's Web-based Utility. 

2)  Use the Factory Default Reset button: Press the Reset button for five seconds and then 

wait for the Router to reboot. 

¾

  POWER:  The Power socket is where you will connect the power adapter. Please use the 

power adapter provided with this TL-WR740N/TL-WR741ND 150Mbps Wireless N 

Router.  

¾

  ON/OFF: The switch for the power. 

¾

  1,2,3,4 (LAN): These ports (1, 2, 3, 4) connect the Router to the local PC(s). 

¾

  WAN: This WAN port is where you will connect the DSL/cable Modem, or Ethernet. 

¾

  Wireless antenna: To receive and transmit the wireless data.