Agilent Technologies 35670A Manuel D’Utilisation
Agilent 35670A
GPIB Commands:
Quick Reference
GPIB Commands:
Quick Reference
This Quick Reference of the GPIB commands recognized
by the Agilent 35670A lists the common commands and
then lists the subsystem commands in alphabetical order.
Figure 1 shows the Agilent 35670A status registers.
by the Agilent 35670A lists the common commands and
then lists the subsystem commands in alphabetical order.
Figure 1 shows the Agilent 35670A status registers.
Syntax descriptions use the following conventions:
|
indicates “or”; one and only one of the items can be
chosen
chosen
< >
indicates the name of items that need further definition
[ ]
indicates the enclosed items are optional
~
indicates a valid range of values
Add a “?” to make the query form of a command;
commands listed with a “?” are query only; commands
listed with a “-?” cannot be queried.
commands listed with a “?” are query only; commands
listed with a “-?” cannot be queried.
A “:” indicates branching points on the command tree.
Use “;” to send multiple commands within a single
program message. The command parser assumes the
second command comes from the same branch as the
preceeding command.
program message. The command parser assumes the
second command comes from the same branch as the
preceeding command.
Use “;:” to reset the command parser to the base of the
command tree when sending multiple commands within
a single program message.
command tree when sending multiple commands within
a single program message.
The input defaults to channel 1 and the trace defaults to
trace A if the optional [1|2|3|4] parameter is not
specified.
trace A if the optional [1|2|3|4] parameter is not
specified.
To view the GPIB command which corresponds to a
front panel operation, press [ Local/GPIB ]
[ GPIB ECHO ON OFF ] to highlight ON.
front panel operation, press [ Local/GPIB ]
[ GPIB ECHO ON OFF ] to highlight ON.
For more information on a particular command
refer to GPIB Programming with the Agilent 35670A.
refer to GPIB Programming with the Agilent 35670A.
1