Peerless Industries UST-WallArm3 Manuel D’Utilisation
7 of 14
ISSUED:07-25-11 SHEET #: 125-9225-1
Secure lower adapter plate onto projector tilt plate (
F) using four M6 x 10 mm socket pin screws (M).
Re-fasten knobs and M10 washers from top of adapter plate assembly (
A).
Place projector tilt plate (
F) onto projector and
secure using four M4 x 8 mm socket pin serrated
washer head screws (
L).
Remove knobs and M10 washers from top of
adapter plate assembly (
A).
2
3
4
A
KNOBS
M10 WASHERS
FRONT OF
PROJECTOR
MOUNTING LOCATIONS
FRONT OF
PROJECTOR
KNOBS
M10
WASHERS
UPPER
ADAPTER PLATE
LOWER ADAPTER
PLATE
UPPER
ADAPTER
PLATE
LOWER
ADAPTER
PLATE
F
L
M
A
F
SHORT FLANGE
OPPOSITE THE
PROJECTOR
LENS
NOTE: MAKE SURE THAT
UPPER ADAPTER PLATE
HOLES ARE CENTERED
WITH PROJECTOR LENS
UPPER ADAPTER
PLATE HOLES