Pitney Bowes DI200 Manuel D’Utilisation

36

Operator’s Guide

REMOVE ALL

This could be due to a material jam in fold plate 1 or near

FROM D & E

the insertion area. Open front cover D and remove any
material that’s there. Close cover D. Open rear cover E and
remove any material in the area. Close rear cover E and start
run.

REMOVE ALL

This is due to a poor feed from manual feeder M. Check

FROM M & D

that there’s no material in manual feeder M. If there is,
remove it. Also open front cover D and remove any material
inside. Close front cover D, reload and start run.

REMOVE SHEET

A sheet has failed to feed from sheet feeder A1. Remove

FROM A1

paper from A1, then reload and start run.

REPLACE

Check that sheet feeder A1 is pushed fully into position.

FDR A1 TRAY

SHEETS

Envelopes have been selected but no sheet feeder was

REQUIRED

selected. The indicators for sheet feeder A1 and envelopes
will be red. Press the sheet feeder selection button until the
required feeder is selected.

SYSTEM ERROR

This is an unrecoverable system error. Please call

CALL SERVICE

Pitney Bowes for assistance at 1.800.253.6565 (USA) or
1.800.672.6937 (Canada).

05 A5 p33-46

6/16/03, 4:33 PM

36