Epson LX-300+ Manuel D’Utilisation
EPSON LX-300+
5/00
EPSON LX-300+
-
3
Paper
Use recycled paper, envelopes, and single-sheet multipart forms
only under normal temperature and humidity conditions, as
follows:
only under normal temperature and humidity conditions, as
follows:
Temperature: 59 to 77 °F (15 to 25 °C)
Humidity: 30 to 60% RH
Humidity: 30 to 60% RH
Do not load paper that has been folded or is damaged,
wrinkled, or curled.
wrinkled, or curled.
Ordinary single sheets:
paper guide and cut-sheet feeder entry
Width
Paper guide
3.9 to 10.1 inches (100 to 257)
Cut-sheet feeder
7.2 to 8.5 inches (182 to 216 mm)
Length
Paper guide
3.9 to 10.1 inches (100 to 257 mm)
Cut-sheet feeder
10.1 to 14 inches (257 to 356 mm)
Thickness
0.0028 to 0.0047 inch (0.07 to 0.12 mm)
Cut sheet feeder: 0.0028 to 0.0055 inch (0.07 to
0.14 mm)
Cut sheet feeder: 0.0028 to 0.0055 inch (0.07 to
0.14 mm)
Weight
14 to 24 lb (52 to 90 g/m
2
)
Cut sheet feeder: 18 to 24 lb (64 to 90 g/m
2
)
Single-sheet multipart forms
Width
3.9 to 10.1 inches (100 to 257 mm)
Length
3.9 to 14.3 inches (100 to 364 mm)
Copies
1 original
+
up to 4 copies
Thickness
0.0047 to 0.015 inch (0.12 to 0.39 mm)
Weight
12 to 15 lb (40 to 58 g/m
2
)
Binding
Line glue at the top of form
Envelopes
Size
No. 6: 6.5
×
3.6 inches (165
×
92 mm)
No. 10: 9.5
×
4.1 inches (241
×
105 mm)
Thickness
0.0063 to 0.0205 inch (0.16 to 0.52 mm)
Weight
12 to 24 lb (45 to 90 g/m
2
)
Continuous paper (standard and multipart):
rear and bottom entry
Width
4 to 10 inches (101.6 to 254 mm)
Length
4 to 22 inches (101.6 to 558.8 mm)
Copies
1 original
+
up to 4 copies
Thickness
Printable area
0.0025 to 0.015 inch (0.065 to 0.39 mm)
Perforated edges
up to 0.035 inch (0.9 mm)
Weight (not multipart)
14 to 22 lb (52 to 82 g/m
2
)
Weight (1 multipart sheet) 12 to 15 lb (40 to 58 g/m
2
)
Binding
Spot glued or crimp bound on both sides (bottom
or rear entry)
or rear entry)
❏
The continuous multipart forms should be securely joined
together along the left and right edges by crimping.
Crimping should be pressed in from the original sheet side
and go completely through all copy sheets.
together along the left and right edges by crimping.
Crimping should be pressed in from the original sheet side
and go completely through all copy sheets.
❏
The ratio of the cut/uncut length at the perforation should
be between 3:1 and 5:1.
be between 3:1 and 5:1.
❏
The perforation between pages should not extend all the
way to the edges of the paper.
way to the edges of the paper.
❏
At the perforation between pages, the horizontal and
vertical perforation cuts should not cross.
vertical perforation cuts should not cross.
❏
The thickness of the perforation part when extended should
be 1 mm or less.
be 1 mm or less.
Continuous paper with labels:
bottom entry only
Label size (minimum)
0.938
×
2.5 inches (23.8
×
63.5 mm)
0.1 inch (2.5 mm) corner radius
Backing sheet width
4 to 10 inches (101.6 to 254 mm)
Backing sheet length
4 to 22 inches (101.6 to 558.8 mm)
Backing sheet thickness
0.0028 to 0.0035 inch
(0.07 to 0.09 mm)
(0.07 to 0.09 mm)
Total thickness
0.0063 to 0.0075 inch
(0.16 to 0.19 mm)
(0.16 to 0.19 mm)
Label weight
17 lb (64 g/m
2
)
Roll paper:
rear entry with optional roll paper holder only
Width
8.5
±
0.12 inch (216
±
3 mm)
Thickness
0.0028 to 0.0035 inch (0.07 to 0.09 mm)
Weight
14 to 22 lb (52 to 82 g/m
2
)