Epson P7000 Manuel D’Utilisation

On the screen that appears on the LCD screen, select Keep Settings Above if the paper settings are 
correct, or select Change Settings, then adjust the settings. 

Press OK.

To avoid indenting or creasing the paper, remove it from the paper path and roll it up when you are not 
printing. 

Note: See the Quick Reference guide or the online User’s Guide for more details on paper handling.

Properly aligning the print head ensures the best print quality. If banding appears on your prints, if they 
look grainy or blurry, or if you see misregistration or “ghosting,” you need to align the print head. 

Although you can align the print head using the printer utility software, aligning the printer from the 
control panel will quickly and automatically perform the most thorough alignment.

Make sure the printer is turned on, and that the printer is loaded with the included Epson 
Doubleweight Matte paper. 

Note: Make sure you select the correct paper type on the printer.

Press the r Menu button. 

Press the u or d button to select Maintenance, then press the r button.

Press the u or d button to select Head Alignment, then press the r button.

Press the u or d button to select Auto, then press the r button.

Press the u or d button to select Bi-D All Color. You should start with this type of alignment.

Press the OK button to start the alignment process

When the bi-directional alignment is completed, repeat this procedure with the Uni-D setting.

Each head alignment takes about 10 minutes. The printer’s white beam sensor reads the alignment pattern 
and adjusts the printer automatically. Make sure you don’t open the front cover or turn off the printer 
during this process.