Philips 5900 Manuel D’Utilisation

AXIS 5900 User’s Manual

29

5. The Wizard searches for a suitable printer driver.

If a suitable driver is not found, you will be asked to select a driver, otherwise 
the Wizard suggests which Printer Model and Printer Driver to use. 

Click 

Change driver to select another driver, or click Finish to accept and 

install the suggested driver.

The installation is complete and you can start using the network printer.

Easy Access to All

Network Printers

The Wizard's Select Network Printer list also provides quick and easy 

access to all connected and configured network printers.

Find...

If the print server is located outside your local subnet it will not appear in 

the list. This may be the case if your router blocks SLP traffic. Click Find. 

Enter the IP address or host name displayed on the print server’s Test page 

and click OK. Example: 192.168.3.191 or AXIS181cf0

Refresh

If the print server has just been switched on, the printer has not had time 

to report its presence. This process can take a few minutes. In this case, 

Printer Model is stated as No printer connected. Click Refresh to rescan 

your local network segment for available print servers and update the 

status. If you still do not see the expected values, click Help and select 

Troubleshooting.

Set IP

To set or change the IP address, select the print server and click Set IP. 

Decide whether you want to configure the IP settings manually or want 

the Wizard to suggest a static IP address. 

Example: Select Suggest... and click OK. Confirm — or modify — the 

Wizard’s suggested IP settings. Click OK.

Note: The Suggest... option is only available when the computer has one 

network card.