Lexmark 30G0310 Mode D'Emploi
54 Serial option <x> error
<x> is the number of the serial option.
Try one or more of the following:
•
Check that the serial cable is connected correctly and is the proper one for the serial port.
•
Check that the serial interface parameters (protocol, baud, parity, and data bits) are set correctly on the printer
and host computer.
and host computer.
•
Press the arrow buttons until
Continue
appears, and then press
to continue printing.
•
Turn the printer off and then back on to reset the printer.
54 Network <x> software error
Try one or more of the following:
•
Press the arrow buttons until
Continue
appears, and then press
to continue printing.
•
Turn the printer off and then back on to reset the printer.
•
Upgrade (flash) the network firmware in the printer or print server.
54 Standard network software error
Try one or more of the following:
•
Press the arrow buttons until
Continue
appears, and then press
to continue printing.
•
Turn the printer off and then back on to reset the printer.
•
Upgrade (flash) the network firmware in the printer or print server.
55 Unsupported option in slot <x>
<x> is a slot on the printer system board.
Try one or more of the following:
1
Turn the printer power off.
2
Unplug the power cord from the wall outlet.
3
Remove the unsupported option card from the printer system board.
4
Connect the power cord to a properly grounded outlet.
5
Turn the printer power back on.
56 Parallel port <x> disabled
<x> is the number of the parallel port.
Try one or more of the following:
•
Press the arrow buttons until
Continue
appears, and then press
to clear the message.
The printer discards any data received through the parallel port.
•
Make sure the Parallel Buffer menu item is not set to Disabled.
Understanding printer messages
164