Axis Communications 5600+ Manuel D’Utilisation

 

Page 6 

 

AXIS 5400+/AXIS 5600+ Installation Guide

This section describes how to set up your Axis print server for printing in Mac OS X 10.2 and 

later. For installation on an older Mac OS, refer to the user’s manual on www.axis.com

1. From the Apple menu, select 

and start the Print Center. 

2. Click Add in the Printer List.
3. From the drop-down list, select 

Bonjour. 

4. Highlight the printer you wish 

to install. The default print 

server name is AXISxxxxxx 

Network Print Server_<port>, 

where xxxxxx represents the 

last six digits of the print 

server’s serial number. 

5. Select the printer brand and 

model from the drop-down list. 

If the printer’s PPD is already 

installed, the brand and model 

are selected automatically.

6. To complete the installation, 

click Add. The printer is now 

added to the Printer List.

•

The print server’s serial number can be found on 
the label on the product casing.

•

To configure printer settings, click Printers > 
Configure Printer. 

•

If the print server using Bonjour is already 
installed, and the print server name or service 
name is changed, the print server must be 
removed from the Printer List and then 
re-installed with the new Bonjour service name.

•

If you change the service name from Setup > 
TCP/IP > Bonjour > Service Name, this name will 
then override the Print Server Name setting as 
set in the admin tools in the product’s Web 
interface.