Avery 9493 Manuel D’Utilisation
T E L N E T C O N S O L E C O M M A N D S
6
Use this chapter to configure the print server using Telnet.
You must have a basic understanding of Telnet commands. For initial setup, do not use Telnet.
Use auto-discover mode. Once you have the IP address, you can use Telnet or a Web browser.
You can use Telnet if you do not have access to the NetManager software.
Note: The default port is Port 23.
You must have a basic understanding of Telnet commands. For initial setup, do not use Telnet.
Use auto-discover mode. Once you have the IP address, you can use Telnet or a Web browser.
You can use Telnet if you do not have access to the NetManager software.
Note: The default port is Port 23.
To access Telnet console mode:
1. Start Telnet.
2. Press Enter (on your host) until you see the “#” prompt.
3. Type
1. Start Telnet.
2. Press Enter (on your host) until you see the “#” prompt.
3. Type
access
as the password and press Enter. (access is the default password.)
4. Press Enter to by-pass the user name. You do not need to enter a username.
Note: The Telnet session times out after 10 minutes of inactivity.
Note: The Telnet session times out after 10 minutes of inactivity.
C o n v e n t i o n s
This section uses the following conventions:
KEYwords
Type the capitalized letters of each keyword instead of the whole keyword.
Some keywords require more capitalized letters than others. For example,
SEt
Some keywords require more capitalized letters than others. For example,
SEt
KEYVAL
RAdio
RAdio
[options]
Mutually-exclusive options are included within square brackets and
separated by a forward slash. Select only ONE of the options. For
example, [DISable/STRICT/FLEXible]
separated by a forward slash. Select only ONE of the options. For
example, [DISable/STRICT/FLEXible]
<values>
Values are included within brackets. Values that contain spaces (multiple
words) must be enclosed within quotation marks (""). For example,
SEt NW PW <value>
words) must be enclosed within quotation marks (""). For example,
SEt NW PW <value>
SEt NW PW "Store 876"
n
Numeric digits are indicated by the letter (n). For example,
SEt IP BOot n
SEt IP BOot 5
SEt NW CHannel nn
SEt NW CHannel 11
SEt IP BOot n
SEt IP BOot 5
SEt NW CHannel nn
SEt NW CHannel 11
S e t t i n g s
1. To view the current wireless settings, type
sh nw
(show network settings) and press Enter:
WiFi Mode = INFRASTRUCTURE
WiFi SSID: ABC1234
Speed = 54
International Roaming: Flexible
Dynamic Frequency Selection: Unsupported
Regulatory Domain = USI
WiFi FW Ver = 2.13.10.0 LMAC, 2.12.18.0 UMAC
AP density = LOW
Authentication type= OPEN SYSTEM
Encryption is Disabled
Local certificate loaded
AP MAC Address = 00 A0 F8 51 B4 FC
Signal Quality = Excellent (100%)
Connected to SSID ENG4121 on channel 11
WiFi SSID: ABC1234
Speed = 54
International Roaming: Flexible
Dynamic Frequency Selection: Unsupported
Regulatory Domain = USI
WiFi FW Ver = 2.13.10.0 LMAC, 2.12.18.0 UMAC
AP density = LOW
Authentication type= OPEN SYSTEM
Encryption is Disabled
Local certificate loaded
AP MAC Address = 00 A0 F8 51 B4 FC
Signal Quality = Excellent (100%)
Connected to SSID ENG4121 on channel 11
Telnet Console Commands 6-1