EAW SBX220 Fascicule
The SBX220 is intended primarily for portable applications,
but it may readily be used in installations where space is
restricted. At only 18 inches high, it is very effective in houses
of worship, clubs, and theatres where subwoofers must be
installed under a low stage.
but it may readily be used in installations where space is
restricted. At only 18 inches high, it is very effective in houses
of worship, clubs, and theatres where subwoofers must be
installed under a low stage.
• Highly compact companion subwoofer for all JFX products
• Unique baffle design and advanced transducers maximize
• Unique baffle design and advanced transducers maximize
LF “punch”
• Low frequency response to 32 Hz
• Reinforced cup for pole mounting JFX loudspeakers
• Foot recesses for stable ground stacking in multiples
• Reinforced cup for pole mounting JFX loudspeakers
• Foot recesses for stable ground stacking in multiples
SPECIFICATIONS SBX220
DESCRIPTION
One Main Street, Whitinsville, MA 01588
508 234 6158
Toll Free 800 992 5013
FAX 508 234 8251
info@eaw.com
www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice.
SBX220/0006389/001/2 pp February 2003
Printed in USA
PERFORMANCE
Frequency Response (1 W @ 1 m)
±3 dB 38 Hz to 300 Hz
-10 dB 32 Hz
Axial Sensitivity (dB SPL, 1 W @ 1 m)
Sub Bass 98
Impedance (Ohms)
Sub Bass 4
Power Handling (Watts, continuous)
Sub Bass 1400
Recommended High-Pass Frequency
24dB/Octave 30 Hz
Calculated Maximum Output (dB SPL)
Sub Bass Peak 135
Sub Bass Long Term 129
APPLICATION
PHYSICAL
System Configuration Dedicated subwoofer
LF Subsystem 2x 12 in cones, vented
Enclosure Materials Exterior grade Baltic birch plywood
Finish Wear-resistant textured black paint
Connectors 2x Neutrik NL4 Speakon
Hardware Pole mount cup for 1-3/8 in
diameter pole (4 ft length
recommended)
recommended)
Grille Powder coated perforated steel,
foam backed
Dimensions
inches
millimeters
Height 18.0
457
Width 25.5
648
Depth 30.0
762
Weights
pounds
kilograms
Net Weight 105
47.7
Shipping Weight 119
54.1
Companion Systems
Any JFX full range loudspeaker
The SBX220 is a compact, high-powered subwoofer with an
enclosure styled to complement JFX Series loudspeakers. It
contains two advanced 12 inch woofers mounted in a “clam
shell” driver arrangement, which provides tight driver coupling
to increase output. A massive port radiates the considerable
energy needed at the enclosure's tuning frequency to comple-
ment the JFX Series' high output.
enclosure styled to complement JFX Series loudspeakers. It
contains two advanced 12 inch woofers mounted in a “clam
shell” driver arrangement, which provides tight driver coupling
to increase output. A massive port radiates the considerable
energy needed at the enclosure's tuning frequency to comple-
ment the JFX Series' high output.
The enclosure includes balance-optimized recessed handles
and rubber feet. A reinforced pole-mount receptacle allows
the SBX220 to double as a base for use with any JFX full range
system. The grille is internally braced to withstand the rigors
of portable use. The input connector for the SBX220 is a
Neutrik NL4 using pins 2+/-. The input is looped through to
a second NL4 for connection to additional SBX220s. Pins 1+/-
can be used for connection and loop through of the signals
for a companion full-range loudspeaker. This means a single
loudspeaker cable to the SBX220 can power both the sub-
woofer and full-range loudspeakers.
and rubber feet. A reinforced pole-mount receptacle allows
the SBX220 to double as a base for use with any JFX full range
system. The grille is internally braced to withstand the rigors
of portable use. The input connector for the SBX220 is a
Neutrik NL4 using pins 2+/-. The input is looped through to
a second NL4 for connection to additional SBX220s. Pins 1+/-
can be used for connection and loop through of the signals
for a companion full-range loudspeaker. This means a single
loudspeaker cable to the SBX220 can power both the sub-
woofer and full-range loudspeakers.
FEATURES