eMachines H3120 Manuel D’Utilisation
CHAPTER 2: Getting to Know Your Computer
www.emachines.com
10
Back
Important
Your computer hardware options and
port locations may vary from the
illustration below.
Component
Icon
Description
Voltage selection
switch
switch
Before turning on your computer, make sure that this switch is in the correct
position for the correct power available. The switch is preset at the factory with
the correct voltage for your area.
In the United States, the utility power is supplied at a nominal 115 volts at 60
Hz. The power supply should always be set to this when your computer is
operating in the United States. In other areas of the world, such as Europe, the
utility power is supplied at 230 volts at 50 Hz. If your computer is operating in
an environment such as this, the voltage switch should be moved to 230. For more
information, see
position for the correct power available. The switch is preset at the factory with
the correct voltage for your area.
In the United States, the utility power is supplied at a nominal 115 volts at 60
Hz. The power supply should always be set to this when your computer is
operating in the United States. In other areas of the world, such as Europe, the
utility power is supplied at 230 volts at 50 Hz. If your computer is operating in
an environment such as this, the voltage switch should be moved to 230. For more
information, see
.
Power connector
Plug the power cord into this connector.
PS/2 mouse port
Plug a Personal System/2
®
(PS/2) mouse into this port.
PS/2 keyboard port
Plug a PS/2 keyboard into this port.
Serial port
Plug a serial device into this port. For more information, see
.
Parallel port
Modem jack
Parallel port
Serial port
PS/2 keyboard port
PS/2 mouse port
Voltage selection
switch
Power connector
Microphone jack
Audio output (Line
out) jack
Audio input
(Line in) jack
Ethernet
(network) jack
Case cover
thumbscrew
thumbscrew
Telephone jack
Monitor port
Case cover
thumbscrew
thumbscrew
USB ports
USB ports
(optional)
IEEE
1394 ports (optional)