MGE UPS Systems Pulsar TM EX20 Manuel D’Utilisation
16
Pulsar EX: E-51032278XT/AB
MGE UPS SYSTEMS
operation on battery
no utility power
1a to 1d indicating the battery
recharge percentage: here,
between 12 and 25%
between 12 and 25%
1e indifferent
1f on
silence
your load is supplied by the utility power
(on line)
(on line)
1a to 1d indicating the load charge
percentage: here 50%
1e off
1f on
silence
At whatever point the utility power
returns, Pulsar switches to normal
operation:
returns, Pulsar switches to normal
operation:
return of utility power
load charge percentage
Note 1:
The "function" button is to deactivate or
activate the audio warning device when
operating on battery, or when site wiring
fault occured.
The "function" button is to deactivate or
activate the audio warning device when
operating on battery, or when site wiring
fault occured.
Note 2:
The "function" button allows you to force a
transfer on bypass (push three times within
5 seconds) and to come back on normal
operation (push again three times within 5
seconds).
The "function" button allows you to force a
transfer on bypass (push three times within
5 seconds) and to come back on normal
operation (push again three times within 5
seconds).
If utility power is present, hold alarm
silence button in:
silence button in:
x +
ε
mn
x mn
0 mn
Pulsar switches off
automatically
automatically
warning alarm at low
battery
battery
indicating the
remaining battery
time: here, between
75 and 87%
remaining battery
time: here, between
75 and 87%
to
silence
1a
1c
1a
1f
flashing
1d
1f
1a
1d
1e
1f
flashing
1e
1 beep every 10 s
your load is supported
by the battery
by the battery
to off
you have less than 12% battery time
remaining: power down your load, Pulsar
will soon switch off automatically
remaining: power down your load, Pulsar
will soon switch off automatically
UPS output "off"
to off
1 beep every 3 s
break in utility power
on
flashing
on