MGE UPS Systems 30A Manuel D’Utilisation
34020113EN/AA
- Page 17
JBUS/MODBUS
2. Installation
2.4 Connection of the communication cards
Tie the cables to the cable way on the door.
Do not run the control wires with
the power cables.
the power cables.
Two slots are available in the card
cage 5 for additional cards.
cage 5 for additional cards.
2.5 Connection of the JBUS communication card
RS232:
Pin 2: Rxd (or Txd)
Pin 3: Txd (or Rxd)
Pin 5: Earth
Pin 2: Rxd (or Txd)
Pin 3: Txd (or Rxd)
Pin 5: Earth
RS485:
Pin 4: R-
Pin 5: T-
Pin 8: R+
Pin 9: T+
Pin 4: R-
Pin 5: T-
Pin 8: R+
Pin 9: T+
For information on using the
communication card, see the
JBUS communication card
manual.
communication card, see the
JBUS communication card
manual.
Only one communication port
(the RS232 OR the RS485) may
be used at a time.
(the RS232 OR the RS485) may
be used at a time.
5
1
2
3
4
5
6
7
8
9