Adder Technology AdderLink IP Manuel D’Utilisation

A locally connected keyboard, video monitor and mouse are required during the 
initial configuration. These are also useful during normal use to allow quick local 
control of any connected host computers. 

1  Position a suitable keyboard, video monitor and mouse in the vicinity of the 

AdderLink IP such that their cables will easily reach.

2  Connect the keyboard, video monitor and mouse plugs to the sockets, 

collectively labelled as ‘KVM CONSOLE’, at the rear of the AdderLink IP.  

COM1

COM2

The AdderLink IP provides an autosensing Ethernet IP port that can operate at 
10 or 100Mbps, according to the network speed. The AdderLink IP is designed 
to reside quite easily at any part of your network: 

•  It can be placed within the local network, behind any firewall/router 

connections to the Internet, or

•  It can be placed externally to the local network, on a separate sub-network 

or with an open Internet connection.   

Wherever in the network the AdderLink IP is situated, you will need to 
determine certain configuration issues such as address allocation and/or firewall 
adjustment to allow correct operation. Please refer to 

the Configuration chapter for more details. 
IMPORTANT: When the AdderLink IP is accessible from the public Internet or dial 
up connection, you must ensure that sufficient 

 are employed. 

1  Depending upon where in the network the AdderLink IP is being connected, 

run a category 5e or 6 cable from the appropriate hub or router to the 
AdderLink IP.

2  Connect the plug of the category 5e or 6 cable into the IP port on the front 

panel of the AdderLink IP.

3  Configure the network settings as appropriate to the position of the 

 for details.