Enterasys Networks 2200 Manuel D’Utilisation

The RESET button shown in 

 resets and re-initializes the 2H258-17R.

To reset the 2H258-17R processor, press and release the RESET button. The 2H258-17R goes 
through a reset process for approximately 60 seconds. Additional downtime may result as the 
device reenters the network.

CAUTION: Pressing the RESET button resets the device, and all current switching 
being performed by the device is halted. A network downtime of up to two minutes will 
result from this action.

NOTE: It is not recommended to press the RESET button while the device is already in 
reset mode. If so, the device will enter an extended diagnostic procedure, which is 
unnecessary for normal operation. This extended diagnostic procedure takes much 
longer than a minute.

3068-10

RESET Button