Intel cc2300 Manuel D’Utilisation

 

14

There are three steps to the Linux Red Hat installation process: 
•  Installing Linux DMI server provider 
•  Installing ISC 
•  Configuring the SNMP_DMI mapper 

1.  Insert the HP Server cc3300 & cc2300 User Information, Diagnostics & Utilities Resource CD   

into the Linux server CD ROM drive. 

2.  Mount the CD using either of the following methods: 

• 

Enter the mount command as follows: 

 

mount /mnt/cdrom  

•  Use the Disk Management utility.  To invoke this utility click the Start button, select 

System, and then select the Disk Management menu option. 

If you prefer a quicker method for installing ISC on RedHat 7.1, look for the 
installation script that is included in the “driver” tab of the cc2300/cc3300 
Resource CD. 

3.  Uninstall the ucd-snmp version 4.2 software package if it has been installed previously with 

rpm –e

. ucd-snmp version 4.2 software is included with RedHat 7.1. ISC runs with ucd-snmp 

version 4.1.  

Check for ucd-snmp version 4.2 using the RPM (RedHat Package Manager) query command. 

Rpm –q ucd-snmp 

Output should be: 

Ucd-snmp-4.2-12 

Type in:   

Rpm –e ucd-snmp 

A message should state ucd-snmp-utils and ucd-snmp-devel are dependent upon ucd-snmp.  

Remove ucd-snmp-utils, ucd-snmp-devel and then ucd-snmp using the following commands. 

Rpm –e ucd-snmp-utils 

Rpm –e ucd-snmp-devel 

Rpm –e ucd-snmp