Microsoft 2004 Manuel D’Utilisation

ISA Server 2004 Configuration Guide 

7 

 

Lab Network Details 

172.16.0.2 10.0.0.3 

10.0.0.1 

10.0.0.1 

10.0.0.2 

10.0.0.2 

10.0.0.2 

10.0.0.2 

Windows Server 2003 

Windows 2000 

DC 
DNS 
WINS 
DHCP 
RADIUS 
Enterprise CA 

IIS: 
WWW 
SMTP 
NNTP 
FTP 

 

Installing and Configuring the Internal Network Domain Controller 

Other than the ISA Server 2004 firewall computer itself, the second most influential machine 
used in the scenarios discussed in the ISA Server 2004 Configuration Guide is the domain 
controller. The domain controller computer will also be used to support a number of network 
services that are used in the variety of ISA Server 2004 scenarios discussed in this guide. It is 
for this reason that we will walk through the installation and configuration of the domain 
controller together. 

You will perform the following steps to install and configure the Windows Server 2003 domain 
controller: 

•  Install Windows Server 2003  
•  Install and Configure DNS 
•  Promote the machine to a domain controller 

The machine will be a functioning domain controller by the time you have completed these 
steps and will be ready for you to install Microsoft Exchange Server 2003. 

Installing Windows Server 2003 
Perform the following steps on the machine that acts as your domain controller computer: 

1.  Insert the CD into the CD-ROM tray and restart the computer. Allow the machine to boot 

from the CD. 

2.  Windows setup begins loading files required for installation. Press ENTER when you see 

the Welcome to Setup screen. 

3. Read 

the 

Windows Licensing Agreement by pressing the PAGE DOWN key on the 

keyboard. Then press F8 on the keyboard. 

4. On 

the 

Windows Server 2003, Standard Edition Setup screen you will create a partition 

for the operating system. In the lab, the entire disk can be formatted as a single partition. 
Press ENTER.