Actron 9640 Manuel D’Utilisation

If no Codes are read, the System Pass 

screen displays.

If problems exist, the screen indicates 

that codes have been read. Use 

UP/DOWN arrow keys to view them. 
Press the 

FUNC key to return to the 

Ford Function List.

The KOER On Demand  is a functional test with the Key ON – Engine 

RUNNING (KOER) that checks the computer module’s inputs, outputs, sensor 

Select KOER On Demand from the 

Quick Tests screen and press 

ENTER.

Perform each step when prompted by the scan tool. Failure to 

follow directions may set DTC(s) in the PCM. 

Follow the instructions displayed on the 

tool. If the steps are not followed 

correctly, a message displays asking 

you to RETRY.

1) Set Parking Brake.
2) Transmission In Park Or Neutral.
3) Turn A/C Off.
4) Start Engine — Let Idle Until Hot.
5) Turn Ign Key Off.
6) Wait 10 Seconds. Start Engine — Let Idle. 
7) If Vehicle Has A Manual Trans., Release Clutch.

System Pass:
No DTCs Found

 

 

 ~

DTCs Found: 2
Use [ To View DTCs
Write Down Codes
For Reference.    ~

Quick Tests

KOEO On Demand

` KOER On Demand

[

KOEO Output State ~

Unable to Run Test ?
  Verify Key ON,
  Engine RUNNING
  <RETRY>   QUIT

~