Actron 9640 Manuel D’Utilisation

The vehicle service manual may recommend erasing Continuous Memory 

Codes from vehicle’s memory, and then driving vehicle to duplicate the 

malfunction before beginning a diagnostic test. If KOEO codes were read using 

Fast Codes, the memory codes have already been erased.

Only Continuous Memory Codes can be erased from the vehicle without 

repairing the fault. To remove KOEO and KOER Codes, the fault must be 

repaired since they only exist when a fault exists.

Select Erase Codes from the Ford 

Function List and press 

ENTER. 

Follow all instructions on the display.

1) Turn Ign Key Off.
2) Transmission In Park Or Neutral.
3) Wait 10 Seconds.
4) Turn Ign Key On.

Press 

ENTER to begin erasing the 

codes. The procedure takes less 1 

minute to run.

Press 

FUNC to return to the Ford 

Function List.

Ford Function List ?

3)Review Codes

]

5)Wiggle test

~

Only Memory Codes
Are Erasable!

Press ENTER to Cont~

To Erase KOEO And 
KOER Codes, You Must
Fix Cause of Code.
Press ENTER to Cont~

Erasing Codes
Procedure Runs Less
Than 1 Minute.
Time Remaining=0:53 ~