Datalogic Scanning 1000I Manuel D’Utilisation
Interface Related Features
3-26
Magellan
®
1000i
Wand Emulation
Supported Symbologies
The Wand Emulation interface will transmit barcode data as a wand device would. This inter-
face will transmit the following barcode symbologies:
face will transmit the following barcode symbologies:
•
UPC/EAN
•
UPC/EAN with addons
•
Code 39
•
Full ASCII Code 39
•
Interleaved 2 of 5
•
Codabar
•
Code 128
Pharmacode 39 is transmitted as Code 39. All other barcode symbology types read by the scan-
ner will be transmitted as Code 128.
ner will be transmitted as Code 128.
Wand Emulation Barcode Format
The following format settings are required for the wand emulation interface. These settings have
been pre-configured at the factory for Wand Emulation scanners.
been pre-configured at the factory for Wand Emulation scanners.
•
UPC-A barcodes must include all 12 digits.
•
UPC-E barcodes must contain 8 digits, including a system digit, 6 data digits, and the
check digit.
check digit.
•
EAN-13 barcodes must have all 13 digits.
•
EAN-8 barcodes must include all 8 digits.
•
Code 39, Code 39 Full ASCII, and Pharmacode 39 barcodes must NOT contain start /
stop characters.
stop characters.
•
Codabar barcodes must include the start / stop characters, presented in the ABCD format.
•
Interleaved 2 of 5 barcodes must have an even number of digits.