Datalogic Scanning 1000I Manuel D’Utilisation

Label ID

A Label ID is a customizable code of up to two ASCII characters (00-FF), used to identify a bar-
code (symbology) type. See 

, for a listing for common symbologies. It 

can be appended previous to or following the transmitted barcode data depending upon how 
this option is enabled. This feature provides options for configuring custom Label IDs individu-
ally per symbology. If you wish to program the scanner to always include an industry standard 
label identifier for ALL symbology types, see the previous feature, 

To configure a Label ID:

1. Scan the START barcode.

2. Select Label ID position as either BEFORE or AFTER by scanning the appropriate bar-

code.

3. Scan a barcode to select the symbology for which you wish to configure a custom Label 

ID.

4. Determine the desired character(s) (you may choose either one or two) which will repre-

sent the Label ID for the selected symbology. Next, turn to the 

 on the inside 

back cover of this manual and find the equivalent hex digits associated with your choice of 
Label ID. For example, if you wish to select an equal sign (=) as a Label ID, the chart indi-
cates its associated hex characters as 3D.

5. Turn to 

 and scan the barcodes representing the hex charac-

ters determined in the previous step. For the example given, the characters ‘3’ and ‘D’ 
would be scanned.

6. Scan the END barcode to exit programming mode.

Prefix

Suffix

Label ID

Label ID

Bar Code Data

Aim ID