Supermicro A+ Server 1010P-TB AS-1010P-TB Mode D'Emploi

iii

Preface

This manual is written for professional system integrators and PC technicians.  It 

provides information for the installation and use of the AS1010P-8(R)/1010P-T(R).  

Installation and maintainance should be performed by experienced technicians 

only.  

The 1010P-8(R)/1010P-T(R) is a high-end server based on the SC816S-(R)400/

SC816T-(R)400 1U rackmount chassis and the H8SSP-8/H8SSP-i, a single pro-

cessor serverboard that supports AMD 100 series processors and up to 16 GB of 

registered ECC DDR333/266 or up to 8 GB of registered ECC DDR400 SDRAM.

The fi rst chapter provides a checklist of the main components included with 

the server system and describes the main features of the H8SSP-8/H8SSP-i 

serverboard and the SC816S-(R)400/SC816T-(R)400 chassis, which comprise the 

AS1010P-8(R)/1010P-T(R).

This chapter describes the steps necessary to install the 1010P-8(R)/1010P-T(R) 

into a rack and check out the server confi guration prior to powering up the system.  

If your server was ordered without processor and memory components, this chapter 

will refer you to the appropriate sections of the manual for their installation.  

Refer here for details on the system interface, which includes the functions and 

information provided by the control panel on the chassis as well as other LEDs 

located throughout the system.