Siemens Software version syngo CT 2005C Manuel D’Utilisation
syngo 3D
245
Radial Ranges
For output types MPR, MPR Thick and MIP Thin you
generate a series of cut images arranged in a star
shape.
For output types MPR, MPR Thick and MIP Thin you
generate a series of cut images arranged in a star
shape.
For output types MIP, SSD and VRT you generate a
series of projections and views of the volume each
rotated around a defined angle. In this way, you simu-
late a step-by-step rotation.
series of projections and views of the volume each
rotated around a defined angle. In this way, you simu-
late a step-by-step rotation.
For example, for colored VRT images, showing a pro-
cess from different angles.
cess from different angles.
Expanded Ranges
With this option you generate images that are located
in front of or behind the reference image. This option,
too, is only available for output types MPR, MPR Thick
or MIP Thin.
With this option you generate images that are located
in front of or behind the reference image. This option,
too, is only available for output types MPR, MPR Thick
or MIP Thin.
For example, for MPRs or MIP Thin through a process in
the lung or abdomen.
the lung or abdomen.
Curved Ranges
If you want to view sub-areas that cannot be obtained
by planar, i.e., flat images, you can draw a cut line with
any curvature freehand. This cut will then be shown as
an image/series in the output segment.
If you want to view sub-areas that cannot be obtained
by planar, i.e., flat images, you can draw a cut line with
any curvature freehand. This cut will then be shown as
an image/series in the output segment.
For example, for MPRs or MIP Thin from the aorta or
the peripheral arteries.
the peripheral arteries.
C2-025.630.01.01.02_APPLICATIONGUIDE_SPIRIT.book Page 245 Friday, April 8, 2005 9:55 AM