Wacom DTK-2200 Manuel D’Utilisation
48
48
CUSTOMIZING TOOL BUTTONS
Select the P
EN
tab to change the functions assigned to the side switches and tip of your pen.
to perform when
pressing the upper or lower side switch.
The selected function occurs when you
bring the pen tip within 5 mm (0.20 inch) of
the display screen surface without touching
the screen and then press the upper or
lower side switch.
bring the pen tip within 5 mm (0.20 inch) of
the display screen surface without touching
the screen and then press the upper or
lower side switch.
Tip:
To make double-clicking easier, set
the side switch to D
the side switch to D
OUBLE
C
LICK
.
Double-click here to change the pen tip function.
•
At least one tool button should be set to the C
LICK
function.
•
The tip must be set to C
LICK
in order to draw in most graphics
applications.
You can change the S
IDE
S
WITCH
M
ODE
to best
fit the way you like to use the pen when
making right-clicks or other click functions.
Click on the control panel O
making right-clicks or other click functions.
Click on the control panel O
PTIONS
... button.
Select:
•
H
OVER
C
LICK
to perform click functions
without touching the pen tip to the display
screen surface. This is the default setting
for all except Tablet PCs.
screen surface. This is the default setting
for all except Tablet PCs.
•
C
LICK
& T
AP
to enable the precise
placement of click functions. When
selected, you must first press the side
switch then touch the pen tip to the
display screen surface in order perform
the function.
selected, you must first press the side
switch then touch the pen tip to the
display screen surface in order perform
the function.
Hover click
Click tap