GE GSD5500G02 Manuel D’Utilisation
165D6290G029
THIS DISHWASHER IS PROGRAMMED WITH A SERVICE MODE TO AID THE TECHNICIAN IN TROUBLESHOOTING THE DISHWASHER.
EACH COMPONENT MAY BE CYCLED TO DETECT IF IT IS FUNCTIONING CORRECTLY. COMPONENTS ARE CYCLED BY PRESSING
KEYPADS TO THE LEFT OF THE START/RESET KEYPAD. USE THE MATRIX BELOW TO DETERMINE HOW TO CYCLE EACH COMPONENT.
EACH COMPONENT MAY BE CYCLED TO DETECT IF IT IS FUNCTIONING CORRECTLY. COMPONENTS ARE CYCLED BY PRESSING
KEYPADS TO THE LEFT OF THE START/RESET KEYPAD. USE THE MATRIX BELOW TO DETERMINE HOW TO CYCLE EACH COMPONENT.
MODELS WITHOUT A TURBIDITY SENSOR
Service Mode Test Matrix*
Keypad
Description
Time in Seconds**
10
Activates Main Pump
120
Activates Auxiliary Pump
60
9
Activates Drain Solenoid
6
8
Activates Detergent Module
30
7
Activates Water Valve
60
6
Activates Heating Element
120
START/RESET
Used to EXIT Service Mode
10
9
8
7
6
5
3
4
2
1
NOTE: INDICATES KEYPAD USED ONLY ON SOME MODELS. WHILE THIS KEYPAD MAY
NOT BE VISIBLE, THE INDICATED SPACE SHOULD ALWAYS BE USED AS A KEYPAD.
NOT BE VISIBLE, THE INDICATED SPACE SHOULD ALWAYS BE USED AS A KEYPAD.
TO ENTER SERVICE MODE :
PRESS KEYPAD #9 AND KEYPAD #1 SIMULTANEOUSLY FOR
5 SECONDS.
PRESS KEYPAD #9 AND KEYPAD #1 SIMULTANEOUSLY FOR
5 SECONDS.
TO EXIT SERVICE MODE :
PRESS THE START/RESET KEYPAD AT ANYTIME TO EXIT.
PRESS THE START/RESET KEYPAD AT ANYTIME TO EXIT.
*NOTE: After 5 minutes of
inactivity, the service mode
will automatically turn off.
will automatically turn off.
**NOTE: When a component
is activated in the SERVICE
MODE, the output will
continue to remain active
(ON) until the Maximum
time has expired or another
keypad is pressed.
MODE, the output will
continue to remain active
(ON) until the Maximum
time has expired or another
keypad is pressed.
N.D. 921-04