Jura Capresso 63942R Manuel D’Utilisation

and two red arrows will appear in the touch screen display
panel, indicating that you are in programming mode. 
The first screen will show:
<

>

By repeatedly pushing the right arrow > the display shows all the
functions you can change or check:

Changing the different functions works in the following pattern:
• Push and hold the P button, until the two red arrows show in 

the display.

• Go to the function you want to program by repeatedly 

pushing the left of right arrows.

• Touch 

• Change the function to the desired setting using either arrow.
• Confirm the new setting by touching 

.

• Push the P button, to leave programming mode.

PROGRAMMING / ACTIVATING CLARIS FILTER
Activating the Claris Cartridge is explained in chapter 16a. 

PROGRAMMING WATER HARDNESS 
Changing the water hardness level is explained in chapter 17. 

18a. PROGRAMMING AROMA
The factory setting is STRONG. You can change to NORMAL. 
In NORMAL the Impressa F9 will grind a little less coffee in each
of the three strength selections (coffee bean symbols).
• Press the P-Button.
• Touch the right arrow symbol repeatedly until the display. 

shows 

.

• Touch 

.

• Touch the right arrow once: 

.

• Touch 

to confirm.

• Press P button to return to 

.

18b. PROGRAMMING TEMPERATURE
The factory setting is HIGH. You can change to NORMAL. In
NORMAL the temperature is approx. 7º F lower than in high.
• Press the P-Button.
• Touch the right arrow until the display shows

.

• Touch 

.

• Touch the right arrow once: 

.

• Touch 

to confirm.

• Press P button to return to 

.

18c. PROGRAMMING WATER QUANTITY (cup sizes)
Each of the three cup symbols (Fig. 5) in the touch screen dis-
play can be set to any size from 30 and 240 ML (milliliters),
respectively 1 to 8 oz. (30 ML = 1 oz.). The factory settings for

18.