Bunn MCAA Manuel D’Utilisation

12

1. Remove the lid and 

water reservoir.

(CAUTION: Do not place the brewer in 

a sink or other water source.)

8. Place a mug or bowl that 

will hold at least 414 ml 

(14 fl. oz.) onto the drip 

tray grate.

4. Replace the reservoir 

and lid and close the 

slide lid.

9. Press and release 

the coffee brew 

button to fill the 

internal  water 

tank.*

5. To ensure the Pod 

Holder  is locked in 

place, use thumb to 

press the pod holder 

release button to eject 

the holder and then 

press all the way in to 

lock. 

(CAUTION: Water may not immediately flow 

from the brewer. Never remove pod holder 

from brewer during a brew cycle.)

(CAUTION: You should hear a clicking sound 

when the pod holder locks in place.)

6. Slide the volume 

control lever to the 

maximum setting.

7. Plug in the brewer 

and turn on the 

power switch.

11. Press and release  

the coffee brew  

button a second 

time.*

(CAUTION: Water should flow from the pod 

holder. Wait until water drip out has finished 

before removing the pod holder.)

P2901

P2961

P2903

P2958

P2965

P2958

P2959

P0214/2960

10. Empty any water in the mug or bowl and  

place the mug back on the drip tray grate.

2. Thoroughly rinse the water reservoir.

3. Fill the reservoir to the 

maximum line with 

    fresh cold water.

P3017

* Some noise is normal when the water 

pump is running.

(NOTE: Wait for Heating Indicator to go out 

before proceeding to Step #11)