Frigidaire 318205325 Manuel D’Utilisation

Page de 22
6
4
3
2
1
BeFore setting oven controls
oven vent location
The oven is vented at the upper control panel and center 
trim. When the oven is on, warm air is released through 
the vent. This venting is necessary for proper air circulation 
in the oven and good baking results.
caution
some models are equipped with a blower which 
runs in self-cleaning mode to keep all internal 
components at a cool temperature. the blower 
may  keep  running  even  if  the  oven  has  been 
turned  off,  until  the  components  have  cooled 
down.
air circulation in the oven
If using 1 rack, place in center of oven. If using multiple 
racks, stagger cookware as shown. 
For best air circulation and baking results allow 2-4" (5-10 
cm) around  the cookware for proper air circulation and be 
sure pans and cookware do not touch each other, the oven 
door, sides or back of the oven cavity. The hot air must 
circulate around the pans and cookware  in the oven for 
even heat to reach around the food.
ARRANGING OVEN RACKS
ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS COOL 
(PRIOR TO OPERATING THE OVEN). Always use oven mitts 
when using the oven.
To remove an oven rack, pull the rack forward until it 
stops. Lift up front of rack and slide out. 
To replace an oven rack, fit the rack onto the guides on 
the oven walls. Tilt the front of the rack upward and slide 
the rack back into place.
Rack 
positions
RECOMMENDED RACK POSITION
Food
Rack Position
Broiling meats, chicken or fish
3 or 4
Cookies, cakes, pies, biscuits & muffins
Using a single rack
Using multiple racks
2 or 3
2 and 4
Frozen pies, angel food cake, yeast, 
bread, 1 or 2 casseroles, small cuts of 
meat or poultry
1 or 2
Turkey, roast or ham
1
note
Always use caution when removing food from the oven.