Bakers Pride CSWG Manuel D’Utilisation

 

 
There is a unique set of touches to enter the programming mode.  
This prevents the case settings from being inadvertently 
changed. 
 
Enter the programming mode from the Default Screen by 
touching the lower left of the touchscreen, then the lower right 
and then the Menu Button [M] in that order.  The Menu Screen 
will then be displayed. 
 
To edit the current settings for either Well Temp or Upper Heater 
touch the appropriate button on the Menu Screen. The Edit 
Setting Screen for the selected heaters will be displayed. 
 
To return to the Default Screen, touch the Exit Button [X]. 
 
If the controller is configured to control each well position 
independently the Edit Setting Screen as shown at right will be 
displayed.  Use the left and right arrows to display the heater 
setting for the various well positions of the unit.  The progress bar 
gives a visual representation of the well location for which the 
setting is being displayed. 
 
The current heater setting is displayed on the right side of the 
screen. Use the up and down arrows to edit the heater setting. 
The setting is a numeric value between 1 and 10 where 10 is the 
hottest setting. 
 
If the controller is configured to control all of the well positions at 
the same setting, the progress bar will be solid and the left and 
right arrows will not be displayed.   Use the up and down arrows 
to edit the heater setting for all of the well positions. 
 
To return to the Menu Screen, touch the Menu Button [M].  To 
return to the Default Screen, touch the Exit Button [X]. 
 
To edit the controller time and date settings touch [Set Clock] on 
the Menu Screen while in the program mode.  The time and date 
will need to be reset if the power supply to the case has been 
disconnected. 
 
Use the left and right arrows to move the cursor under the value 
to be edited.  Use the up and down arrows to edit the value.  
Continue until the current date and time is displayed. 
 
To return to the Menu Screen, touch the Menu Button [M].  To 
return to the Default Screen, touch the Exit Button [X]. 
 

 
 
 

 

 
 
 
 
 
 
 
 

 

 

 
 

Lower Left 

Lower Right 

Menu Button