Smeg SCB66MPX5 Manuel D’Utilisation

All the control and monitoring devices are clearly in view on the front panel. The table below provides the
key to the symbols used.

OVEN THERMOSTAT

FRONT LEFT-HAND COOKING ZONE

FUNCTION SELECTOR KNOB

REAR LEFT-HAND COOKING ZONE

REAR RIGHT-HAND COOKING ZONE

FRONT RIGHT-HAND COOKING ZONE

Standard heating
The ring beside each knob identifies the corresponding cooking zone. To switch
it on, turn the knob to the required setting. Setting is on a gradual scale, so all
the intermediate positions between the numbers can be used.

To switch off the zone, return the knob to the 

 setting

Dual heating
The ring beside each knob identifies the corresponding
cooking zone. To heat the inner cooking zone, turn the knob
to the required setting. To heat both cooking zones (inner
and outer) simultaneously, turn the knob to   / 

 and then

release it. The knob will return to the maximum setting. To
regulate the heating level, turn the knob anti-clockwise to the
setting required. To return to heating of the inner cooking

zone, turn the knob to 

 and then turn it to the required

setting. To switch off the zone, return the knob to 

The cooking temperature is selected by turning the knob clockwise to the
required setting, between 50° and 275°C.
The light comes on to indicate that the oven is heating up. This light goes out
when the set temperature is reached. Flashes at regular intervals to indicate
that the temperature inside the oven is being kept constantly at the set level.