Smeg AP64S3 Manuel D’Utilisation

 

 

  

 Having carried out the above adjustments, reassemble the appliance 

following, backwards, the instructions in paragraph “5.1 Removing the 
separable control panel

 

/ 5.2 Removing the hob”. 

 

  

 

 

 

 Reposition the components on the burner and 

slide the knobs onto the cock stems. 
Light the burner and set it on the minimum 
position. Take the knob off again and turn the 
regulating screw on the side of the cock stem 
until a steady minimum flame is achieved. 
Refit the knob and verify the burner flame is 
stable (turning the knob rapidly from the 
maximum to the minimum position the flame 
must not go out). 

 

  

 

 

 

 To regulate the minimum for LPG, completely tighten (clockwise) the 

screw inside or next to the gas tap pin (depending on the model). 
The diameters of the by-passes for each burner are given in table “5.3

 

Regulation for LPG”.