Radio Shack 21-1679 A Manuel D’Utilisation

Page de 20
Powering Your CB Radio
You can power your CB radio from one of these four sources:
•  The rechargeable Ni-MH battery pack
•  Eight AA batteries (not included) using the supplied battery 
case
•  AC power using an AC-to-DC power supply
 
(not included)
•  Vehicle power using a DC power cord (not included)
Using the Ni-MH Battery Pack
Charge the Ni-MH battery pack (using the supplied AC charger) 
for about 18 hours prior to using it for the first time. Afterward, 
it takes 14-16 hours to charge the battery pack when it is fully 
discharged. 
You can charge the battery pack while it is installed or removed. 
But the CB radio does not work during charging.
To charge the battery pack:
Connect the AC Charger to the 
CHG Jack, then plug it into an AC 
outlet. The CHARGE Indicator 
lights red and charging starts.
Note:  The supplied AC charger 
is for charging only, not for 
directly powering the CB.
To install the battery pack:
Slide the battery pack onto the 
CB radio until it clicks. The battery 
pack fits onto the CB radio only 
one way. Do not force it.
To remove the battery pack, slide 
the battery pack in the arrow 
direction while holding up the 
latch.
Cautions:
•  To avoid injury, do not connect 
Latch
CHG Jack
CHARGE 
Indicator
Slide to remove 
battery pack
21-1679A_En_111207.indd   4
11/12/2007   17:32:51