POSIFLEX Business Machines KS-6217 Manuel D’Utilisation

 

 

Part 20

All paragraphs below are applicable for models with touch panel only. 

The user of those models without touch panel can ignore them and consider 
this user’s manual ends here. 

The touch panel in KS system uses internal USB interface as standard 

and occupies no external port. Only the optional InfraRed type touch panel of 
KS-6215 uses RS232 interface and occupies COM2 port. When the touch 
driver is properly installed, this touch panel works exactly like a standard 
mouse for each interface. However, if the system is running under safe mode, 
the touch panel calibration may become unsatisfactory due to disabled drivers. 
It is recommended to use a standard USB mouse or keyboard in this mode. 

All the below mentioned mouse emulation functions can be 

manipulated through relevant software. The system can give a beep and a click 
on the left button of a mouse at the point when the touch panel is touched. If 
the point touched is dragged across the screen surface, it works as the mouse 
drag and drop feature. If the point is touched, released and touched within a 
short time interval, it is double-clicking left button of the mouse. To obtain the 
effect like clicking on the right button of a mouse, touching any point on the 
screen surface after touching the right-click sticky button results as a click on 
the right button of the mouse at that point.

 

A program named “Posiflex USB Touch Manager”  and a right-click 

sticky button tool in the program group  “Posiflex  USB Touch  Tools” is 
installed in the preloaded Windows system with a USB interface touch panel 
controller. This program can also be obtained by download from the 
POSIFLEX web site. 

If the KS system purchased is the leading edge Infra Red type touch 

models, the touch controller is of RS232 interface. The “Posiflex  Touch 
Terminal Manager” above should be disregarded. In these models within KS-
6215, the COM2 position of the system will be covered in the connection area. 
Removal of this cover will void the product warranty!! 

Once the  RS232 touch controller driver is installed, the user can 

utilize it to control the mouse emulation. Please click “Start”, “Settings” 
“Control Panel” and “Elo Touchscreen” or just click the “elo” icon in tool tray 
to engage this utility. However, with this touch controller 
driver, certain display mode like full screen display of 
Windows DOS box should be avoided. 

 

警告使用者 

這是甲類的資訊產品，在居住的環
境 中 使 用 時， 可能會造成射頻干
擾，在這種情況下，使用者會被要
求採取某些適當的對策。