Garmin Flight Deck 100 Manuel D’Utilisation
190-00728-04 Rev. A
Embraer Prodigy
®
Flight Deck 100 Pilot’s Guide
101
ENGINE & AIRFRAME SYSTEMS
TAKEOFF DATA SET WINDOW
When the aircraft is parked or is taxiing, the Outside Air Temperature (OAT) for the departure airport can be
set and Automatic Thrust Reserve (ATR) enabled/disabled in the Takeoff Data Set Window.
Figure 3-6 Takeoff Data Set Window
Setting the Outside Air Temperature (OAT):
1)
Select the SYSTEM Softkey.
2)
Select the ENG SET Softkey to display the Takeoff Data Set Window.
3)
To adjust the temperature in 1 °C increments, use the OAT and OAT softkeys,
4)
If desired, change the ATR status while the Takeoff Data Set Window is displayed.
5)
To confirm the selected takeoff settings and close the Takeoff Data Set Window, select the ACCEPT Softkey,
Or
:
To cancel the operation, select the BACK Softkey.
On aircraft electrical power-up, Automatic Thrust Reserve (ATR) is enabled by default. ATR status (defined
in Table 3-1) is shown at the top of the EIS Display (Figure 3-7).
Indication*
Description
ATR
ATR enabled in both engines
ATR
ATR armed in both engines, but inactive
TO - RSV
ATR activated in at least one engine
* When no indication is shown, ATR has not been
enabled or armed in both engines.
Table 3-1 Automatic Thrust Reserve (ATR) Status