Garmin Flight Deck 100 Manuel D’Utilisation
190-00728-04 Rev. A
Embraer Prodigy
®
Flight Deck 100 Pilot’s Guide
155
AUDIO PANEL AND CNS
TCAS II TRANSPONDER MODE SELECTION (OPTIONAL)
Mode selection can be automatic (Altitude Mode) or manual (Standby, On, and Altitude Modes). The STBY,
ON
,
ALT
,
TA ONLY
,
and TA/RA Softkeys can be accessed by selecting the XPDR/TFC Softkey, then the MODE
Softkey.
Selecting a transponder mode:
1)
Select the XPDR/TFC Softkey.
2)
Select the MODE Softkey to display the Transponder Mode Selection Softkeys.
3)
Select the desired softkey to activate the transponder mode (STBY, ON, or ALT).
Selecting a TCAS II mode:
1)
Select the XPDR/TFC Softkey.
2)
Select the MODE Softkey to display the TCAS II Mode Selection Softkeys.
2)
Select the desired softkey to activate the TCAS II mode (TA ONLY or TA/RA).
STANDBY MODE (MANUAL)
NOTE:
In Standby Mode, the IDENT function is inhibited. TCAS II is switched to Standby Mode, because the
transponder is not capable of supporting TCAS II operation in Standby Mode.
Standby Mode can be selected at any time by selecting the STBY Softkey. In Standby, the transponder does
not reply to interrogations, but new codes can be entered. When Standby is selected, a white STBY indication
and transponder code appear in the mode field of the Transponder Data Box. In all other modes, these fields
appear in green.
and transponder code appear in the mode field of the Transponder Data Box. In all other modes, these fields
appear in green.
STBY Mode (White
Code Number and
Mode)
Figure 4-41 Standby Mode