Garmin Flight Deck 100 Manuel D’Utilisation
190-00728-04 Rev. A
Embraer Prodigy
®
Flight Deck 100 Pilot’s Guide
602
ADDITIONAL FEATURES
8.8 SCHEDULER
The Scheduler feature can be used to enter and display reminder messages (e.g., Hot Section Inspection or
Phase 1 Maintenance Check) in the Messages Window on the PFD. Messages can be set to display based on a
specific date and time (event), once the message timer reaches zero (one-time; default setting), or recurrently
whenever the message timer reaches zero (periodic). Message timers set to periodic alerting automatically reset
to the original timer value once the message is displayed. When power is cycled, all messages are retained until
deleted, and message timer countdown is resumed.
specific date and time (event), once the message timer reaches zero (one-time; default setting), or recurrently
whenever the message timer reaches zero (periodic). Message timers set to periodic alerting automatically reset
to the original timer value once the message is displayed. When power is cycled, all messages are retained until
deleted, and message timer countdown is resumed.
Figure 8-127 Scheduler (Utility Page)
Entering a scheduler message:
1)
Select the AUX - Utility Page.
2)
Press the FMS Knob momentarily to activate the flashing cursor.
3)
Turn the large FMS Knob to highlight the first empty scheduler message naming field.
4)
Use the FMS Knob to enter the message text to be displayed in the Messages Window and press the ENT
Key.
Key.
5)
Press the ENT Key again or use the large FMS Knob to move the cursor to the field next to Type.
6)
Turn the small FMS Knob to select the message type:
• Event—Message issued at the specified date/time
• One-time—Message issued when the message timer reaches zero (default setting)
• Periodic—Message issued each time the message timer reaches zero