D-Link DWC-1000 Manuel D’Utilisation
Wireless Controller
User Manual
23
Figure 8: DM Z c onf iguratio n
In order to configure a DMZ port, the controller configurable port must be set to
DMZ in the
DMZ in the
Setup > Internet Settings > Configurable Port
page.
2.4 Universal Plug and Play (UPnP)
Advanced > Advanced Network > UPnP
Universal Plug and Play (UPnP) is a feature that allows the controller to discovery
devices on the network that can communicate with the controller and allow for auto
configuration. If a network device is detected by UPnP, the controller can open
internal or external ports for the traffic protocol required by that network device.
devices on the network that can communicate with the controller and allow for auto
configuration. If a network device is detected by UPnP, the controller can open
internal or external ports for the traffic protocol required by that network device.
Once UPnP is enabled, you can config ure the controller to detect UPnP-supporting
devices on the LAN (or a configured VLAN). If disabled, the controller will not allow
for automatic device configuration.
devices on the LAN (or a configured VLAN). If disabled, the controller will not allow
for automatic device configuration.
Configure the following settings to use UPnP: