Panasonic KX-PS8100 Manuel D’Utilisation
120
Installing Software for Windows
7
Press Tab and type the internal name of the printer in
lowercase letters.
lowercase letters.
NOTES:
•
Type this name exactly as shown; it is required for
communication with the printer.
communication with the printer.
The name must be one of these:
xjdirect
xjhold
xjprint
xjhold
xjprint
•
Use the last two internal names only if your printer has a hard
disk drive and a minimum of 32 MB of memory.
disk drive and a minimum of 32 MB of memory.
8
Click
[OK]
.
The workstation checks the address or DNS name that you entered
and notifies you if it cannot resolve the address.
and notifies you if it cannot resolve the address.
9
Click
[Close]
of the Printer Ports window.
The Ports property tab shows the new port configuration.
10
Click
[OK]
to close the Panasonic KX-PS8100
Properties window.
The new port has been configured. You should now print a test
page to verify the connection.
page to verify the connection.
11
Open the Panasonic KX-PS8100 Properties window.
Click the General tab and click Print Test Page.
Click the General tab and click Print Test Page.
When you print, your files are sent over the LPR Port connection to
the printer.
the printer.
12
Click
[OK]
to exit.
When a Typical installation is performed using the installer, following files
are automatically installed.
are automatically installed.
•
Digital Duplicator Utility
•
Status Display
•
Scanner Driver
You can also select following additional file to install during a Custom
installation procedure.
installation procedure.
•
Print Count Manager
32
Installing the
scanner driver and
utilities for Windows
NT 4.0
scanner driver and
utilities for Windows
NT 4.0