Panasonic KX-PS8100 Manuel D’Utilisation

This chapter describes how to configure the printer’s Setup options. The 
settings you specify in Setup determine user access to the printer, printing 
defaults applied to jobs, and general system settings. Some Setup options 
are specified during an initial Setup from the printer panel; others must be 
set later from Fiery WebSetup.

Initial Setup for network printing must be performed using the printer panel. 
After the initial Setup is complete, you must finish configuring Setup options 
using Fiery WebSetup (

). Some options set from the printer 

panel can also be modified using Fiery WebSetup. 

The general steps for performing Setup from the printer panel are:

•

Specify parallel port settings (

•

Specify network port settings (

•

Specify network protocol settings (

Before you change any Setup options, it’s a good idea to print the current 
configuration settings, in case you need to restore these settings later. For 
information on printing a configuration page, 

Use the following procedure to access the Parallel Port Setup, Network Port 
Setup, and Network Protocol Setup menus from the printer panel.

Turn on the printer.

Wait until “

Ready

” or “

Ready(Sleep

)” is displayed.

Press the MENU/EXIT button.

To advance through the options, press the 

▲

 /CONTINUE button; to return to previous options, 

press the 

⁄ 

/CANCEL button.

To select an option, press the ENTER button.

Repeat steps 3 and 4 to continue accessing other options.

To exit the Setup menus at any time, press the MENU/
EXIT button.