Philips CEM2000B/05 Guide D’Installation Rapide

Overview of parts 1

These are the supplied parts needed to connect

and install this unit.
a

In-car audio system

Sleeve

Front panel

Standard ISO connector

Trim plate

Rubber cushion

Disassembly tools

h Screws (4 pieces)
i DAB antenna

Connection

Caution

•

Ensure that all loose leads are insulated with

electrical tape.

For cars with ISO connectors

234

Pull out the ISO connectors from car

dashboard and connect them to the bigger

end of the supplied standard connector.

Connect the other end of the supplied

standard connector to the unit.

Connect the antenna and amplifier as

illustrated, if applicable. You can connect the

car audio to the amplifier through RCA-TO-

RCA cables (not supplied).

Connector

Connect to

ANTENNA

Antenna

FRONT LINE

OUT R (Socket)

Front right speaker

FRONT LINE

OUT L (Socket)

Front left speaker

REAR LINE

OUT R (Socket)

Rear right speaker

REAR LINE

OUT L (Socket)

Rear left speaker

DAB Antenna

For cars with ISO connectors

4 5

Caution

•

Be sure to connect the black ground (earth)

lead first.

Connect the antenna and amplifier as

illustrated, if applicable.

Cut off the bigger end of the supplied

standard connector.

Check the car’s wiring carefully and connect

them to the supplied standard connector.

Connect the supplied standard connector to

the unit.

Green/black strip Left speaker (Rear)

White/black strip Left speaker (Front)

Gray/black strip

Right speaker (Front)

Purple/black strip Right speaker (Rear)

RED

Ignition key +12V DC when

ON/ACC

BLUE

Motor/electric antenna relay

control lead/Amplifier relay

control lead

BLACK

Ground

YELLOW To the +12V car battery

which is energized at all times

Mount in the dashboard 6

If the car does not have an on-board drive or

navigation computer, disconnect the negative

terminal of the car battery.

If you disconnect the car battery in a car

•

that has an on-board drive or navigation

computer, the computer may lose its

memory.

If the car battery is not disconnected,

•

to avoid short-circuit, ensure that bare

wires do not touch each other.

Remove the two screws on the top of the

unit.

Remove the mounting sleeve with the

supplied disassembly tools.

Install the sleeve into the dashboard and

bend the tabs outward to fix the sleeve.

Place the supplied rubber cushion over the

end of the mounting bolt.

Slide the unit into the dashboard until you

hear a click sound.

Reconnect the negative terminal of the car

battery.

Attach the front panel 6

Attach the trim plate.

Insert the right side of the panel in the

chassis until it is correctly engaged.

Press the left side of the panel until the

mechanism locks it into place.

Turn on

Press to turn on the unit.

To turn off the unit, press

•

for over

3 seconds.

Set clock

Press MENU.

Press or repeatedly until current time is

displayed.

Turn to set hour.

Press to confirm.

Turn to set minute.

Press to confirm.

View clock

Press and hold OPTIONS repeatedly until

the clock is displayed.

Listen to radio

Press SOURCE repeatedly to select Tuner.

Press or to select band: [FM1], [FM2],

[FM3], [AM1], or [AM2].

Press or to tune to a radio station

manually.

To search for a radio station automati-

•

cally, press or for over 3 seconds.

Listen to Digital Audio Broadcasts (DAB)

For the first time when DAB mode is switched on.

Press SOURCE on the main unit repeatedly

to select DAB/DAB+.

The system performs auto scan.

All the available DAB stations is stored.

The radio tunes to the first available

station.

Play a disc

Insert a CD with the printed side facing up.

Play starts automatically.

Play from USB

Slide the USB socket cover marked

the left.

Insert the USB device into the USB socket.

The unit starts playing from the USB

device automatically.

NOTE

Avoid prolonged use of the apparatus with volume above 85 decibels as this may damage your hearing.

CEM2000B_05_QSG_V1.2.indd 2

10/13/2010 4:42:40 PM